Razor Disposal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little piece to hold onto razor blades
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I use a box cutter/razor style knife a lot for work, and always find myself in an inconvenient spot when I need to swap blades. I always try to find a good place to safely dispose of them like embedding them in boxes or layering them up in tape but theres not always a good solution or place to discard them.
This is my quick solution to the issue. The print has a slot that you can slide the razor right into, and there are basically pillars within the slot that the blade will cut into and hold itself in place. Once the blade's embedded it should be safe to chuck in the trash, or throw in your pocket until you get somewhere to discard it.
It can be a bit tough to get the razor all the way in, but I wanted to make sure it held on well enough for me to be confident. I'm open to suggestions for making it easier to use. Currently using a hard surface or pliers works fine for me.
I tried to make it as small as possible, and plan to just keep a few in my tool bag.