Angle grinder disc holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are a lot of angle grinder disc holder models, but I couldn't find one with the exact set of characteristics…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I recommend using this model instead:
There are a lot of angle grinder disc holder models, but I couldn't find one with the exact set of characteristics that I wanted:
fits 4.5" discs with 7/8 arbor
has the column attached to the base, not the top, so that you can take the top off and select the disc you want
is the right height for my packout toolbox
So here's my model. I used soluble filament for the support for the bottom. If you don't have that available, I suggest filling in the base if you care about the print quality of the bottom.
This is a new version which has a custom 6-start thread, so it opens in one smooth motion and you never need to turn it more than 60 degrees before it starts threading.
Category: Tool Holders & Boxes