1 / 2
POP My Hero Academia – Shigaraki #784 - stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist display stand for POP! My Hero Academia – Shigaraki #784
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a minimalist display stand designed specifically for the Funko POP! My Hero Academia – Shigaraki #784 figure. The stand offers enhanced stability for display on shelves or desks, especially as the original figure tends to tip over.
Printing Recommendations
- Orientation: Print flat on the build plate for maximum stability.
- Layer Height: 0.2 mm is sufficient.
- Infill: 10–20% – strength is not critical.
- Supports: Not needed.
- Material: PLA recommended.
Design Notes
- The base is a low-profile disc tailored to match the footprint of Shigaraki’s figure.