LoobToob 3D Printed Cover (Vase Mode)

I'm a fan of Radar Laboratories' LoobToob syringe/applicator combos. They've got 3D printed covers available on their site, and you should absolutely buy from them directly if you'd like! However, if you're interested in a slightly simplified version, read on!

I made a version of the cover that is designed to be printed in vase mode. This means:

• it prints quite quickly
• it uses very little material
• it's a strong print despite not using much material

I'm providing 3D files for free download. Please note that these are shared under CC BY-NC-SA 4.0.

A few notes on printing:

• I've included .3mf files that pull in slicer settings
• These parts are designed to be printed with a 1.0mm wall vase. I found that there were a few weird areas where the slicer thought the material was <1.0mm thickness. Rather than debug the model, I've had good success just telling the slicer to print 0.99mm walls :)
• You will need to ≥1.0mm of solid bottom layers to correctly print the bottom part of the cover
• I print these in ABS for my own use, but you should be able to print 'em in whatever you want

I've modeled covers for the 10 mL and 20 mL syringes since that's what I've got on hand. Happy to add more if needed, just let me know!