T12 Tip Holder Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T12 Tip Holder for 12 tips
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a T12 tip holder I designed for my portable soldering station. There is a cavity in the “Holder Bottom” file to encapsulate a 30mm x 2mm magnet. The idea was it would prevent the holder from falling over when selecting a tip. However, I have not tried this feature. The lid should be a tight snap fit with little to no back and fourth movement.
This T12 tip holder is small enough to easily fit inside a Harbor Freight Apache 1800 case. This was one of my requirements because this is for my portable soldering station.
To add the magnet insert a gcode pause on layer 15 and insert the magnet. Please verify the dimensions of the magnet vs the 3mf file. I have found significant size differences when re-ordering magnets from Amazon.