Magnetic Label Frame for RepRack (Fits 28 mm IKEA HUGAD Rod)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic frame for labels – snaps onto 28 mm IKEA HUGAD rod to organize your filament rolls.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Ever spent minutes (or hours…) trying to remember which filament is on which spool? Meet your new little helper: the Magnetic Label Frame for RepRack.
Slide in a 64×37 mm label, snap it onto your 28 mm IKEA HUGAD rod, and voilà – instant organization! Each frame holds a tiny 6×3 mm neodymium magnet, giving it a surprisingly strong grip while weighing barely 6 g – lighter than a slice of bread, but much more useful.
Why you’ll love it:
- Easy to update: swap labels faster than your coffee gets cold
- Magnetic, yet featherlight: stays put without bending your rods
- No more mystery spools: finally, your PLA, PETG, and “what-is-this?” filament are clearly labeled
A small piece of plastic, a tiny magnet, and a bit of ingenuity – sometimes the simplest ideas make the biggest difference in your Maker life.
Tips & Tricks for Maximum Filament Happiness:
- Print a unique frame for each filament roll – see the actual color of your filament at a glance! Perfect for those rare or fancy spools. Downside: it takes a bit of printing time if you have a huge collection.
- Print frames by material type – PLA in one color, PETG in another, etc. You can print multiple frames at once (up to 12 on a Prusa MK4/S or CoreOne), making it super fast to equip your whole rack. Material sorting has never been easier!
- Label creation made easy – initially, I thought about 3D-printing the labels too, but with 70 rolls in my collection, I switched to printing labels on paper using Word. Fast, flexible, and easy to update – especially if your filament stash keeps growing!
Printing information
The STL file ist correctly aligned.
Nozzle: 0.4 mm
Layer height: 0.2 mm
Perimeter: 2
Infill: 10 %
Brim: recommended
Support: no
Magnet insertion: insert a 6×3 mm neodymium magnet by adding a pause in your slicer at Layer #46 (9.2 mm).
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.