1 / 1
Bike fender 16'' wheel, BTwin
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The fender for 16'' wheel.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The fender for 16'' wheel.
I was not able to find a suitable fender on the market. All of them are too small for the rear wheel and riding on wet ground. So I modeled it.
Split it into parts in Orca, and print ABS. 100% infill is recommended.