Filament Scraps Bag Holder (Universally Scalable for all Table Sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're anything like me, your garbage/rubbish bin for filament scraps is crap -- I just wanted to be able to…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
If you're anything like me, your garbage/rubbish bin for filament scraps is crap -- I just wanted to be able to somewhat quickly "swipe it" out of the way when it was on the table.
This has already undergone 2 revisions before it was even released on thingiverse; Only fair to print your own crap and learn what you designed poorly first, right?
INSTRUCTIONS: Print on the flat side, hoop down. (see pics)
- I printed mine at .4 resolution.
- Takes about 36 minutes
- 14g
- I used a doggy-poop plastic bag for the filament cause it's less gangly than a grocery sack; Works well; Simply fold down the top over the loops, and you're done.
The height is set for a 5/8ths of an Inch table top. You will likely need to scale up for a larger sized table. :)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.4
Infill:
10%
Filament: AMZ3D PLA Red
Notes:
BED: 60
NOZZLE: 204
SAUCE: Awesome
How I Designed This
Blender. I used Blender.
Category: 3D Printer Accessories