dadamachines automat mounts for crotales
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a bunch of parts I made for a dadamachines automat MIDI-based solenoid controller…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
These are a bunch of parts I made for a dadamachines automat MIDI-based solenoid controller system. https://dadamachines.com/products/automat-toolkit/
They were built with crotales in mind, so they hold the solenoids and strike the crotales from underneath.
When assembled it looks and sounds like this: https://www.youtube.com/watch?v=PndwhgupLM4
These were designed and built for this performance: https://www.youtube.com/watch?v=MTWklm1oXWQ
The main components are the Solenoid Bottom and Solenoid Side mounts. To assemble a single solenoid stand you need two sides and a bottom. The rest of the parts are for mounting an assembly as seen in the photos.
The non-printed parts required are: -22mm dowel (for the crotale holder) -5.5mm dowel (for the center of the crotales) -M3 bolts/hardware -28mm adhesive felts (for under crotales and under Solenoid Base) -5mm x 2mm disc magnets (optional, for the aluminium foil holders)
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.28mm
Infill:
80%
Notes:
I printed everything at 0.28mm and that worked well enough in terms of detail. The Solenoid Side is the most intricate part with its cable guides, but the rest are pretty functional parts.
Category: Music