1 / 2
Dremel Press - Press-Fit Bearing Lever - 608zz Bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I changed the previous design to fit 608zz bearings (8x22x7mm) (Outside / Inside / Thickness)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This model is a REMIX of @Wufflykins_1765356's model: https://www.printables.com/model/763287-revised-lever-for-press-fit-bearings
- Uses 2x 608zz bearings (22x8x7mm) (outside, inside, thickness)
I tried wufflykins model, but after printing noticed I had ordered the wrong bearings. So I decided to change his model and I made the lever arm fit the bearings I did have.
