1 / 3
ukulele / guitar stand with counter weight (no support)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed ukulele stand with cavity for counter weight.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 236
- Wydruki
- 1
- Wyświetlenia
- 2873
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (62)Powiązane
I made a ukulelestand that has a cavity that you can fill with water or dirt to create a counterweight to make sure that the uke won`t tip over!
Add some small floor protectors underneat and on top to finish the print.
NO SUPPORTS NEEDED!
UPDATE : second model is better suited for smaller models