Sovol SV08 top glass cover holder / storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a simple design to hold the glass cover of the SV08 enclosure safe and secure.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 357
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I wanted to find a way to store the top glass door of the Sovol SV08 OEM enclosure. It attaches to the side of the SV08 enclosure using four M3 x 10 (or 12mm) screws. To give it some strength, I printed it with three walls and four top and bottom layers, using 20% infill and the gyroid pattern.
If you want a holder that can also store print beds (plates), please check out my other model at:
https://www.printables.com/model/1413008-sovol-sv08-lid-and-print-plateprint-bed-holder
You can check out my other models at:
https://www.printables.com/@Toy_Maker_3184077/models
Your “likes” and “boosts” are appreciated.