1 / 3
Oversized Mewtwo Pokemon Card-hueforge hybrid — zdjęcie 1
1 / 3

Oversized Mewtwo Pokemon Card-hueforge hybrid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a hybrid pop-out style hueforge I created of a Mewtwo Pokémon card. This is my first publicly released model so be sure to let me know what you guys think in the comments and share your makes!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 173.16x241.35mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.52mm and the Actual Thickness is 2.16mm

Filaments Used: 

 

PLA+ Sunlu Black Transmission Distance: 5  

PLA+ Sunlu Blue Transmission Distance: 4 

PLA Elegoo Purple Transmission Distance: 3.1 

PLA Creality Hyper White Transmission Distance: 7 

PLA+ Sunlu Yellow Transmission Distance: 10 This print uses 5 unique filaments

 

 

Swap Instructions:

 

 Start with Black

 At layer #8 (0.72mm) swap to Blue 

At layer #9 (0.8mm) swap to Perfect Purple 

At layer #13 (1.12mm) swap to White 

At layer #20 (1.68mm) swap to Yellow 

At layer 27 (2.24mm) swap to White for the rest (mewtwo)

 

You can get a sneak peek of new models before they are released as well as what's coming off my printers on my tiktok @print3d_options!

Tagi