Glencairn Glass Cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable models for Glencairn whiskey/bourbon glasses. Available in 4 glass, 6 glass and 8 glass versions.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Printable models for Glencairn whiskey/bourbon glasses. Available in 4 glass version, 6 glass version and 8 glass versions. Each version has separate holes for 2 oz tasting bottles: 3 in the 4 glass version, 4 in the 6 glass version and 6 in the 8 glass version.
I printed the exterior box, handle and latches in PETG and the insert in 85A TPU. There is also pad (also 85A TPU) that fits in the top cover that when closed will gently press against the Glencairn glass and hold it in place.
I did 8% gyroid infill and 3 perimeter on the 85A TPU and 10% on the PETG case. Increase as needed for the handle and latches.
The assembly will require 8 M3x30 screws and M3 hex nuts. The nuts all fit in printed holes in the enclosure and are not visible once assembled.