ATX PSU mount for AM8-style printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to mount an ATX PSU to a an AM8 or similar printer using 2040 extrusions. Attach it with up to 8 M5 screws…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
A bracket to mount an ATX PSU to a an AM8 or similar printer using 2040 extrusions. Attach it with up to 8 M5 screws and T-slot nuts.
Because the PSU will be offset from the vertical extrusion to which it is mounted (in order to keep the mounting holes accessible), the included bottom support is needed to keep it vertical. This is mounted with 2 M5 screws and T-slot nuts.
The cutout for the power plug and switches is suitable for the Antec HCG650 modular PSU. Modify the vector atx_cutout (components are x-position, y-position, length and width) in the source file if it is not suitable for your PSU.
The source file requires dotSCAD for the Voronoi-pattern grille.
Category: 3D Printer Parts