LayersFactory
Zgłoś model
1 / 4
Roomba ChewwyBot cleaner — zdjęcie 1
1 / 4

Roomba ChewwyBot cleaner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Other House Equipment
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

This is an aid to help with the removal of hair and fluff from the roller of a Roomba Robot cleaner. 

Operation :- remove the Roomba's roller, slip the large diameter of the ChewwyBot cleaner over one end (you might need to twist it a bit to orientate the fins of the roller with the circles on the ChewwyBot) and then simply draw it along the roller, the cleaner will pick up fluff and hair along its length.

It's mostly generic so may fit other Robot cleaners too ( entrance is 50mm , exit is 40mm).

Print Instructions :-

  1. Print in orientation of STL file. i.e. small diameter too the print bed.
  2. No supports or infill required.
  3. 0.2mm step height.
  4. I used a brim, (as i printed with 230°C PETG on a non-heated bed)

“In every corner, the Force is present… and so is grime.”