Werewolf Can Holder / Beer mug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can Holder for 0.5L Cans (12oz+330ml can inserts)
- Ocena
- 4,75 / 5
- Polubienia
- 81
- Pobrania
- 481
- Wydruki
- 3
- Wyświetlenia
- 1303
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Can holder in the shape of the Werewolf
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 28°), blocked supports inside the mouth (pic).
If you want to have the handle on the opposite side, just right-click on the object in the slicer and put mirror by the Y axis.
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable
Happy printing:)