Cold Shoe Mount with compact Ball Joint with threaded rod for small camera (action cam or webcam)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cold Shoe Mount with compact Ball Joint with threaded rod for small camera (action cam or webcam)
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 223
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a Cold Shoe Mount with a compact Ball Joint intended to mount a lightweight camera such as an Action Cam above a computer monitor, to be used as a webcam. Similar solutions are readily available online (Amazon, AliExpress, …), but they are usually bigger and intended to be used with heavier camera.
The Cold Shoe Mount allows a quick and easy installation. However I don't provide here a model for the Cold Shoe socket support to mount on the computer monitor, since it would differ from one monitor to another.
All the threads between the screws and the nut are already adjusted so that the Tightening Washer Nuts can rotate freely while the other nuts have a strong fit.
Printed in 0.2mm layer height, on Elegoo Neptune 4 0.4mm nozzle, Elegoo Rapid PLA +, no support needed, 30% infill Grid, ~50min print time.