Dual Color Filament Orientation Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small object to help identify how to orient your print when using dual color filament.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
I wanted something that I could print to accurately dial-in my prints when using dual color filament before I printed the real object. I have a lot of black & color filaments, and it annoys me when the black is not symmetrical with the design, so I created these 2 models. The tick marks are every 15 degrees, there are 24 flat surfaces around the edge, and a smooth sphere in the center.
I printed the samples with a 0.4mm nozzle at 0.20mm, 0.15mm, and 0.10mm. Not sure which of the 2 models (A or B) I like better, so I included them both. I hope you find them useful.