mask with custom lens holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
goggles/mask thing that I designed for glasses lenses. lens.stl is copied/mirrored to create holes in the model.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution
A mask model that can be edited to hold glasses lenses.
The lens.stl file, or whatever lens shape model you may have, can be copied, moved, mirrored, and scaled to become a cutting shape for the goggles.stl part's geometry (I did this with a cutting mesh, 0 walls, and 0 infill density). I recommend printing with the nose hole facing up and the strap section at the back flat on the bed. The goggles.stl file can also be scaled to fit the user.
The model can fit at a 45-degree X to Y angle on a 220 mm print bed. it may fit on smaller beds, but I wouldn't recommend it.
Supports are required for this print, and infill density doesn't really matter, except for the lenses, being 0 density.
I used cura slicer to print my version of the part, so I am unaware of any other slicer requirements.
I also used window gasket strips to keep the lenses in place and elastic cord in the holes on the side as straps.