Measuring Cup Citrus Juicer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a citrus juicer that is designed to fit into a standard 2-cup glass Anchor brand measuring cup. My wife was…
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 530
- Wydruki
- 13
- Wyświetlenia
- 1629
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a citrus juicer that is designed to fit into a standard 2-cup glass Anchor brand measuring cup. My wife was annoyed with juicers that didn't have enough of an "edge" to release the juice from her citrus, so this one has sharper teeth on the juicer. Printed in PLA then annealed for stiffness, dishwasher-safe temperature resistance, and final fit. Enjoy!
Post-Printing
Anneal your print for correct fit
Use the following guide to anneal your juicer (if made from PLA) for correct fit: https://all3dp.com/2/annealing-pla-prints-for-strength-easy-ways/
Category: Kitchen & Dining