Druid/Mage Staff Cosplay Prop (Lights Up)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This epic prop is printed in at least 14 separate pieces so you can build it full-size, which is about 160 cm.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 109
- Wydruki
- 2
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring some magic to your cosplay with this glowing druid staff! ✨🌿 This model is designed by Lily from scratch, live on her Twitch stream. This epic prop is printed at least 14 separate pieces so you can build it full-size, which is about 160 cm.
It has some special hidden features
- 🍬 You can hide candies or trinkets in a hidden mushroom drawer at the top
- 💡 You can hide a bikelight/LED for the staff to light up. I updated the design for you, so there should be space for whatever you have.
- 🔩 You can use the thread in the middle, which allows for easier transport
- 🏐You can print the bottom part in a flexible material like TPU to make it easier to handle in crowds
⚠🐸 You might notice a frog in some of the photos — that little buddy was part of my personal build, and not design by me but by Lacalavera so it’s not included in this model.
You’ll need:
- 3D print glue~ I used Bison Fast Fix
- 2 light sources ~ I used Dutch Rechargable Bike Lights
- Wooden dowels the ones I used had quite a loose fit ~I used 8x35mm
- Broomstick - the one I used had quite a loose fit ~ I used a metal one I cut shorter with a 22 mm diameter
It’s a big project to print, finish, and assemble, is a quest on its own! But for a quick win, I’ve also included a mini version you can print just for fun 🐣