Dyson Vaccum Hose Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A connector for attaching a flexible hose to the Dyson vacuum.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
About
An adapter for connecting vaccum hose to hand held Dyson vacuum. Assumes hose with 43 mm outer diameter and counter clock wise thread with 6 mm pitch. No idea if this is in any way standard, it was just the hose I had :-) the thread dimensions and profile are editable in the source.
Printing
The prototype was printed in PETG with 0.15 mm layers and 3 perimeters, variable layer height, probably less important was the 33% gyroid infill.
The part that goes into the Dyson vacuum should be printed with the wider side up, automated supports except for the space inside the tube where the button sinks in. Use brim.
The part that goes into the vacuum hose should be printed with the thread side up, automated supports on the build plate. Use brim.
Be careful when connecting the two parts, the plastic catch bits break off easily along layers. Perhaps reducing the print fan or increasing the printing temperature somewhat for those bits would help.
Copying
Model sources available at https://github.com/ceresek/prints/tree/main/things/living/dyson-hose-nose. Model CC-BY [email protected]. Using SolidPython and OpenSCAD.