Somewhat universal food dehydrator to filament dehydrator dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal food-to-filament dehydrator adapter, fits 277×237 mm base with 30 mm radius corners, tested on KitchenBrothers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Many makers convert food dehydrators into filament dryers, but most designs are specific to one model. This design is intended to be more universal, fitting any dehydrator with a similar base size and shape.
Base dimensions: 277 × 237 mm with 30 mm radius corners
Print volume: Fits within a 300 × 300 mm 3D printer bed
Compatibility: If your dehydrator matches these dimensions, this design should fit without modification
The model doesn’t rely on special features of a particular brand, making it flexible for different dehydrators. It has been tested successfully with a KitchenBrothers dehydrator.
If you print only 1 riser it can hold 1 spool. When using 2 risers, it can hold 2 spools.
Printing:
- Make sure to flip the parts upside down for printing