1 / 10
ZMR GoPro/Xiaomi/SJCam Angled Mount - 20°/25°/30°/35° — zdjęcie 1
1 / 10

ZMR GoPro/Xiaomi/SJCam Angled Mount - 20°/25°/30°/35°

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tilted camera mount for GoPro-format action cameras (GoPro, Xiaomi Yi, SJCam and others) on the ZMR250 racing…

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tilted camera mount for GoPro-format action cameras (GoPro, Xiaomi Yi, SJCam and others) on the ZMR250 racing quadcopter frame. 4 different versions in 20/25/30/35 degrees tilt.

Use two zipties and double-sided tape to mount to frame. No vibration dampening needed, just tune your quad properly :) (BorisB's Betaflight branch of Cleanflight highly recommended)

Use a standard velcro band (same one as used for lipos) to mount the camera.

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%+

Notes:

Print in the standard orientation (back side down) to minimize overhangs/bridging. Turn right side up only if you're sure your printer will manage the 25mm bridge over the main strap slot.

Category: R/C Vehicles

Tagi