1 / 2
Tamiya Semi Truck Suspension Spacer — zdjęcie 1
1 / 2

Tamiya Semi Truck Suspension Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My Arocs 3348 was sitting a little low in the rear. I created this spacer to lift it a little bit. These spacers are…

Ocena
0 / 5
Polubienia
13
Pobrania
75
Wydruki
0
Wyświetlenia
1164
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

My Arocs 3348 was sitting a little low in the rear.

I created this spacer to lift it a little bit.

These spacers are designed to work on the front and the rear.

The center hole fits over the rivet holding the spring leafs together.

Thickness is 1.5mm, this is all you can add without any other modifications.

The stock u-bolt have some thread left over in the rear, for the front you will need to supply 8 regular M3 locknuts.

Category: R/C Vehicles

Tagi