v1.3 "HYBRID_TRAP" & v1.0 "THE TRAP" lichtfalle lighttrap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
v1.3 is a hybrid light baffle for "v1.3 THE RING" + "v1.3 THE FLANGE" & "THE CONNECTOR" (75-200mm)
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1041
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
If you like what I do here, come visit my (German) Discord or my Facebook group.
Discord: MX-creations
Facebook: 3D printed Grow Tools & Accesories - free .stl
changelog:
22.05.2026 - added "hybrid-trap" for "v1.3 the connector" & "v1.3 the ring" combined with "v1.3 the flange"
note:
- the files have two bodys u have to print the massive part without top/bottom layers, no perimeter and 40-50 & gyroid infill
- print it with massive part down !
- sizes available from 75-200mm
---------------------------------------------------------------------------------------
v1.0
-used for “THE RING”
big THX to Dodasch, using gyroid infill was his idea !!
see also:
“THE CONNECTOR”
“THE RING”
“THE FILTER”
print settings:
- top layer = 0
- bottom layer = 0
- infill: min 15% gyroid
- use PLA black
assembling:
- stack all 4 parts and place them into “THE RING” standard