Repair buckle (male) for Timbuk2 courier bags
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For broken Timbuk2 courier bag's front cover buckle, 22mm wide, male side only, no unstitch needed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This model is for repairing Timbuk2 courier bag's two 22mm wide front cover buckle. It may fit other bags too. Fit isn't perfect, but should be usable enough.
Printing parameters:
- Material: PETG or other flexible plastic. PLA is too brittle for this.
- Infill: 100%
- Supports: ON
Other requirements: One M2.5x25+ screw & nut to screw into the tail of the buckle.
Usage: No need to unstitch the head of the strip. Thread the thick head of the strip from the direction of the bar into the hole between the bar and body. Then, bend the tail in the direction opposite of the bar, and screw the screw in.
Took the idea from: https://www.printables.com/model/1247230-field-repair-bucklehttps://www.printables.com/model/1247230-field-repair-buckle
