Hanger for Revopoint Trackit Scanner on original Tripod - Updated version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a nice way to "park" the scanner so I scanned the Trackit and designd a nice hanger
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
3D-scan of the Trackit used to design this mount: https://www.printables.com/model/1407719-revopoint-trackit-3d-scan
Standalone tripod stiffener: https://www.printables.com/model/1419214-revopoint-trackit-tripod-stiffener-to-prevent-unwa
I was made aware that some tripods don't have the screw hole. Therefore I mashed the hanger together with my tripod stiffener to allow it to be clamped between the legs of the tripod. Test the stability before hanging the scanner. I am not liable for any potential damage.
Background:
I wanted to be capable to “hang” the scanner on the tripod between scans. So I made use of the ¼ mounting point existing on the tripod and designed this hanger.
The scanner can be simply tilted on the hanger and a protective layer of TPU protects all contact points of the scanner to keep the finish of the carbon intact.
This is achieved with a TPU inlay on the hanger (optional) and TPU bumpers for the contact points with the tripod.
Additional parts you need:
- ¼ in screw for cameras (I used this one: https://de.aliexpress.com/item/1005006654252037.html?spm=a2g0o.order_list.order_list_main.10.1ca41802W9qpd8&gatewayAdapt=glo2deuhttps://de.aliexpress.com/item/1005006654252037.html?spm=a2g0o.order_list.order_list_main.10.1ca41802W9qpd8&gatewayAdapt=glo2deu)
- Other ¼ in screws will also fit, but this one was used to design the knob
Printing:
Different versions:
- Original version: Standalone hanger, needs screw hole in tripod
- Cutout for stiffener: Same as original but has a cutout for the tripod stiffener
- Clamped: Combination of hanger and stiffener, doesn't need screw to be mounted
Option 1: TPU inlay
Either print the hanger (best PETG) and its paddings (TPU) with a printer like the H2D in place from the step file or print them separate and later glue them together with superglue.
Additionally print the tripod bumpers from TPU and attach them with zip-ties to the tripod as shown in the rendering.
When the ¼ screw and screw knob (best PETG) will be used press them together after adding a drop of superglue (keep an eye on the correct alignment of the screw). Thread the screw into the hanger and mount the hanger by screwing it tight.
Option 2: No inlay
Print the unibody hanger from PETG. Additionally print the tripod bumpers from TPU and attach them with zip-ties to the tripod as shown in the rendering.
When the ¼ screw and screw knob (best PETG) will be used press them together after adding a drop of superglue (keep an eye on the correct alignment of the screw). Thread the screw into the hanger and mount the hanger by screwing it tight.