Kit to grow cuttings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy modular kit to grow your cuttings / to use with dirt
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- PRODUCT DESCRIPTION
Here is my new design ! A modular kit to grow cuttings.
In its regular version the “pot” is 16 by 16 cm making it available on A1 mini and without any AMS. You can design covers yourself but in my basic version you have 17 holes to place cuttings in different cases. There is room to write down what you are growing, and you can fill the pot by every free hole.
In the front there is a gauge, if you are using Translucent filament you can see the remaining level of water ! I used Blue tranclucent PETG from bambulab.
- PRINTING INSTRUCTIONS
I have not put a 3mf file as every one will use different filaments, colors and material. There is no need for high mechanical but you need it to be water proof so use 4-5 walls and 15% infill will be enough. Also make sure when you use your slicer to put a certain amount of layers on top and bottom surfaces as well !!
Regarding the assembly, everything is logical and instinctive.
!! WARNING : I DO RECOMMEND USING SILICONE / GLUE OR CHEAP BATHTUB JOINT around the gauge otherwise you will have leaks at this point