1964 - 1966 Thunderbird Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Hang On" style Cupholder for your 1964/66 Thunderbird Center Console
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Cupholder is designed to be used with the following Magnetic strips from Amazon; https://amzn.to/4nEp1iH (this is my affiliate link, please use this to support this FREE model, thanks).
Directions;
The main 3 magnetic strips are meant to be used with their 2 sided tape in place. (I also glued mine for safety).
For the outer edge of the hanger, I used another magnetic strip and cut it down to size. (see photos), I superglued that magnet to the bottom of the outermost hanger WITH NO TWO SIDED TAPE.
I recommend using tree supports under the “hook” area. Printed with 12.5% infill but you might go higher to get some more support. I printed my pictured test with PLA but my final version will be with PETG-CF to avoid the hook warping.
Hope this helps fill a void where one is needed on our old T-Birds!
Thanks!
I've not tested in 64/65 models as I have a 66. per some online pictures, it appears this would work.
Disclosure; I've tested with 12oz Cans, 16oz Water bottles and a 32oz fountain drink with no issues. I'm unsure if it'll hold up to a 44oz. I'm not responsible for any spills, damages or accidents resulting from the use of this cupholder.