VW Amarok Heater Flap internal gear - Drivers Side
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Internal Gear that attached the Arm of the heater flap mechanism to the motor.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a recreation of the main driving gear of the VW Amarok heater flap. This gear is where the Arm attaches into the motor setup. It is not a perfect recreation but it is as close as I could model with my experience. I have also modelled the Arm for the Amarok as I could not find this online also.
With the supports printed in the way I have shown, they were very hard to remove from the centre hole but once removed, the model performed great.
I printed this in Nylon as I am not certain what wear and tear it will received as well as the heat requirements. It has been working well in my Amarok for around 4 months now.