Dashboard VoCore 5" for Simagic Wheelbases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This dashboard is designed for sim racers who own the Simagic wheelbase. It is easy to print and assemble
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This dashboard is designed for sim racers who own the Simagic wheelbase. It is easy to print and assemble, and has an attractive appearance. You only need to purchase the display separately.
It is not compatible with new Simagic EVO wheelbase!!
Components:
| VoCore 5" display | available from the official website |
| Micro USB Cable to USB-A or / Micro USB Cable to USB-C (it is up to ou) |
Assembly:
| 4x M3x6mm screws (for the display holder and cable holder) |
| 2x M4x20mm screws (for mounting the dashboard to the wheelbase) |
| 4x M3x8mm screws (for back side panel) |
After you have printed all the parts:
- After you have printed all the parts, insert the Vocore display into the body
- Place the display holder part in the center, and secure it with M3 screws.
- Next, I added double-sided 3M tape and attached the Vocore board to the back of the display so that it stays in place and the cables are not strained.
- Then, I measured how much micro USB cable I needed and screwed it to the back of the cover, and then connected it to the Vocore display.
- Now you attach the back side panel and it is done.
Print Settings :
Recommended for all parts.
If you want the same finish as shown in the photos, print all parts with the front face down on a carbon-textured plate. You can buy this plate from China as sticker or PEI plate.
I printed it with this settings from PLA and PETG-CF all good.
| Layer height | 0.2mm |
| Walls | 4 |
| Top layers | 5 |
| Bottom layers | 3-4 |
| Infill density | 15% |
| Enable Supports (mainly for Body.step file) | True |
If you need any help or have any questions, please contact me via messages.
Please share your 3D Prints. Thank you 🙏