Heavy Duty Rail Hook for Vaude QMR 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beefed up version of the Vaude bike pannier rail hook replacement.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
When the hook on my pannier broke, i was very happy to find a printable replacement, but just as sad when it broke on the first ride :(
I stuck to the basic shape, but beefed it up in general:
- wider stem, because why not
- thicker prong, because the original is a bit flimsy
- fairer lines, because the original broke at the intersection of two surfaces. I incorporated a swept shape into the bend and filleted the bejesus out of the thing.
In short: the same thing, but swole. The prong is slightly shorter; I have always felt that the original one was overly long.
The beefed up shape is incompatible with the original orange-headed screw. You will have to use an M4x20mm (M4x18 if you have one, M4x16 if you want to fidget around with the metal plate inside the rail.
Print with the flat bit down, with an abundance of wall loops, and out of a sturdy material of your choice.