Enclosure for ProtoBoard 1593K and NodeMCU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a project box / enclosure designed to fit the BusBoard Prototype Systems PR1593K circuit board. That…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a project box / enclosure designed to fit the BusBoard Prototype Systems PR1593K circuit board. That particular board is available with or without a matching ABS case -- this is essentially a clone of that ABS case, only with an opening on the side for the USB port on a NodeMCU V3 board, if its positioned one perf row in on the board.
The end panels can either be drilled out or customized for whatever openings you need. But I had found the ABS box that was available with the board couldn't be cut cleanly for the USB port. Plus, I could print it in other colors.
I printed it at .15 resolution with 20% infill and three shells, but the walls are thin enough that the infill is barely used.
The board mounts to the box with the screws that come with it (4-40), The top and bottom screw together with two 4-40 bolts, 3/4" long.
Category: Electronics