1 / 1
Non return valve 32mm for water and pvc pipes — zdjęcie 1

Non return valve 32mm for water and pvc pipes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Non return valve 100% 3d printed for water. 32mm PVC tube

Ocena
0 / 5
Polubienia
1
Pobrania
22
Wydruki
0
Wyświetlenia
204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a 100% 3D-printed non-return valve for water. It is compatible with a 32 mm PVC pipe system and is designed to be used between two female connectors. I used several of these valves to make a powerful water cannon with other components. The body and key must be printed in ABS and glued to the PVC using standard PVC glue. I did this with 30% infill and a 0.2 mm structural profile. The flap is printed in TPU 95A (flex) with 100% infill and a 0.2 mm structural profile. The key maintain the flap and avoid any rotation. It is not fully watertight. All parts must be printed with a smooth bed; the smoothness of the first layer of the body and the flap is required for sealing.