Yet another hotend - Voron Stealthburner Creality KE Hotend - Super Value

Voron Stealthburner Creality KE Hotend - Super Hi value hotend for your Voron Stealthburner.

After using a bunch of cheap to expensive hotends, I found great option I wanted to share.    I bought a few of these and have them with .4 / .6 / .4 Carbide nozzles. I hate swapping nozzles. Same hardware = same tolerances;)  Pair with Swiss micro to upgraded heater if desired.   They offer a diamond tip as well.  Therm is maxed out above 260 ish.  You can swap it if need but I can print ASA / PC just fine.  

Output Quality - The hi flow is about equal to my non-hi flow Phaetus Dragon - but way faster, cheaper, and you can source from amazon.

Swissmicro heater upgrade - Probably not needed, but heats up crazy fast and the temp variance is amazing - therm is quite good as expected.   So you have great upgrade path if desired in the future.

https://www.amazon.com/Microswiss-FlowTech-Hotend-Creality-Ender/dp/B0CW3TMKT7/ref=sr_1_1?s=industrialhttps://www.amazon.com/Microswiss-FlowTech-Hotend-Creality-Ender/dp/B0CW3TMKT7/ref=sr_1_1?s=industrial

The vanilla KE  is pretty good at $32.99 especially for PLA / PETG.  Stock comes with a ti heatbreak and hardened steel tip!  Replacement heater +therm is $20.  Amazon delivery in 2 days !

https://tinyurl.com/3twa7x8jhttps://tinyurl.com/3twa7x8j

Specs below.

• Official Hotend Kit for Ender 3 V3 SE/KE: 100% Creality Official upgrade ceramic heating block kit for Ender-3 V3 SE/KE 3D printers, our Creality KE hotend can be used for high speed printing. Notice: Please ensure that Official Creality Ender 3 V3 SE KE Hotend Upgrades Kit's length of 0.028M Teflon tube corresponds to Ender-3 V3 KE, the length of 0.022M Teflon tube corresponds to Ender-3 V3 SE
• Up to 600 mm/s High-speed Printing: Ender 3 V3 KE ceramic heating block kit with a 30% increase in the entire hotmelt section, Ender 3 V3 KE heating block allows for printing speeds up to 600 mm/s. The Ender 3 V3 SE hotend's burr-free orifice is less likely to clog the material and provides stable printing
• Updated Quick-swap Nozzle Kit: Ender 3 V3 SE hotend improved integrated nozzle reduces clogging and greatly enhances the fluidity of the consumables to increase the success rate of printing. Stable Ender 3 V3 SE heating block makes the printing more stable and the printing accuracy is higher. All-metal Integrated Design: Ender 3 V3 SE ceramic hotend with integrated quick-swap nozzle with all metal hotend material and heat break for 300°C high temperature resistance
• Upgrade Durable Material: The 3d printer extruder hotend kit's throat is made of titanium alloy to minimize heat transfer. Creality Ender 3 V3 KE ceramic heating block kit is suitable for printing on a wide range of consumables such as PLA, ABS, PETG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF, and so on. Notice: Please ensure good adhesion on the first printing layer; if necessary, re-adjust the level and apply adhesive to improve adhesion. Nozzle clogging can occur with improper adhesion of the first layer, causing the nozzle to pick up loose print material and deposit it outside as it moves
• High Flow&Efficient Cooling: Creality Ender 3 V3 KE hotend upgrade kit's heat dissipation part adopts split design to reduce heat transmission; the ceramic heating block's surface is nickel-plated to improve abrasion resistance and increase luster; the hotend assembly kit is equipped with a rugged and powerful 60W 360° encircling ceramic heating ring, which can be heated to 200℃ in 40 secondsOfficial Hotend Kit for Ender 3 V3 SE/KE: 100% Creality Official upgrade ceramic heating block kit for Ender-3 V3 SE/KE 3D printers, our Creality KE hotend can be used for high speed printing. Notice: Please ensure that Official Creality Ender 3 V3 SE KE Hotend Upgrades Kit's length of 0.028M Teflon tube corresponds to Ender-3 V3 KE, the length of 0.022M Teflon tube corresponds to Ender-3 V3 SE
• Up to 600 mm/s High-speed Printing: Ender 3 V3 KE ceramic heating block kit with a 30% increase in the entire hotmelt section, Ender 3 V3 KE heating block allows for printing speeds up to 600 mm/s. The Ender 3 V3 SE hotend's burr-free orifice is less likely to clog the material and provides stable printing
• Updated Quick-swap Nozzle Kit: Ender 3 V3 SE hotend improved integrated nozzle reduces clogging and greatly enhances the fluidity of the consumables to increase the success rate of printing. Stable Ender 3 V3 SE heating block makes the printing more stable and the printing accuracy is higher. All-metal Integrated Design: Ender 3 V3 SE ceramic hotend with integrated quick-swap nozzle with all metal hotend material and heat break for 300°C high temperature resistance
• Upgrade Durable Material: The 3d printer extruder hotend kit's throat is made of titanium alloy to minimize heat transfer. Creality Ender 3 V3 KE ceramic heating block kit is suitable for printing on a wide range of consumables such as PLA, ABS, PETG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF, and so on. Notice: Please ensure good adhesion on the first printing layer; if necessary, re-adjust the level and apply adhesive to improve adhesion. Nozzle clogging can occur with improper adhesion of the first layer, causing the nozzle to pick up loose print material and deposit it outside as it moves
• High Flow&Efficient Cooling: Creality Ender 3 V3 KE hotend upgrade kit's heat dissipation part adopts split design to reduce heat transmission; the ceramic heating block's surface is nickel-plated to improve abrasion resistance and increase luster; the hotend assembly kit is equipped with a rugged and powerful 60W 360° encircling ceramic heating ring, which can be heated to 200℃ in 40 seconds

Notes:

2 additional M3 heatsets and 2 M3 x 12 (I think) are needed.   If you have a voron, this is not anything new.

The tiny screws to connect the heater to heatsink is weak point.   Swissmicro heater kit comes with stainless stronger screws.  However with either heater care must be taken to NOT overtighten.  The threads on the softer aluminum heatsink side is the issue. Use appropriate hi temp locktight or just slap it on and don't fiddle with it ;) 

The pictured is printed on my Voron with a KE hotend.  0.4 stock nozzle.  Eryone PETG CF.