Guitar Effects Pedalboard (build your own)

There are a few decent pedalboard designs on thingiverse -- but I wanted to be able to make my own custom sized board (so it'd easily fit in my desk drawer for storage) -- so I made this.

There's the 'Tube' (which is 2" x 1") -- which you can print to whatever size you want (scale the Z axis up/down in your slicer), then there are connectors (I connect, L connector, T connector and X connector).

For anyone who wants to leverage the far edge with smaller pedals -- I also included the connectors with raised portions -- so you can add more velcro to it. It's not perfectly flush because I wanted to leave room for imperfections in the printing/etc.

You can make this as big or as small as you want. I printed mine with 4 walls and 3 top/bottom solid layers -- and it's a damn tank.

This will sit entirely flat to the ground -- so if you want elevations, you will probably want to remix the L connectors (I may do this in a future update -- for now I'm planning on adding rubber feet that will hopefully get me enough clearance from the floor.

The pictured print was 3x 175mm tube, 3x 150mm tube and 4x 65mm tube (around 700g of filament assuming no mistakes).

The connectors used here were 4x L, 4x T, 1x X (around 500g of filament).

If you find this useful, I'd love to see a picture of your pedalboard setup. If you have suggestions for ways I can improve this, drop me a line.

Happy shredding!

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

.3

Infill:

Filament: Inland PLA+ Black

Notes:

Category: Music