Bridges of Cubison County
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A version of the infinity cube fidget toy that also happens to stress bridging
- Ocena
- 4,5 / 5
- Polubienia
- 38
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 927
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
There's already a mess of infinity cubes out there but I needed an excuse to mess about with print in place hinges and bridging. Hence my humble offering.
I totally borrowed the design from mjdargen over on instructables. The tutorial is pretty easy, though I didn't follow it too closely. Unlike the solid model, supports are required. The floating hinges on each end (see the attached image) need to be held up to print - unless you want to summon the flying spaghetti monster, that is…
Caution: When I sliced this model with PrusaSlicer half of the bridges were done in the wrong direction and a little messy as a result. SuperSlicer doesn't have this problem.
I've included both the Fusion360 file and a STEP version in case you want to modify things.
All are designed with a 0.2mm layer height for clearance. If you want to change this, you have to modify the clearance parameter in the CAD file.