Vyper ProtoXtruder 2.0 Extruder Mount + Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct drive extruder mount for the Anycubic Vyper with printhead cable strain relief
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
An upgrade for the Anycubic Vyper designed to provide strain relief for the printhead cable, as well as providing mounting holes for a direct drive extruder. This is specifically designed for the ProtoXtruder 2.0, but the hole spacing may allow other extruders to fit with Sherpa Mini hole spacing. This model was designed to fit the “E” variant of the Vyper, I do not know the compatibility with earlier versions.
Requires 4x M3 heat set inserts for mounting extruder and bracket to carriage, M3 screws, and a zip tie to secure the printhead cable. Printing from a stiff, creep-resistant plastic like ABS or PC is recommended. The original PTFE coupler on the heatsink must be removed.