Quick PSU mount & power switch / HE3D K280 / Delta / 20-2020 style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick PSU mount - a series of combined models to print for delta / 20-2020 style printers. Meant for HE3D.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A very simple PSU mount, using the extra brackets and bolts that came with the K280 HE3D. I added an optional plate for holding the power cable, and allowing the inclusion of a standard aliexpress power switch (~19mm x 9mm)
Installation Notes
Mounting the PSU is slightly tricky, I found measuring it before mounting helped. The optional bottom panel can screw on either side of the PSU, but fits one side better.
You want (2x) clips, and an optional (1x) part-b.
Kit Items
This is part of a complete set I created for my K280 / HE3D and should be compatible with other 20-2020 style delta printers. It was designed around the 280mm base.
https://www.printables.com/@LloydSummers_3568672/collections/2637519
Version History
Version 4.0
- First Release
- Adjusted the optional part-b surface so it can fit either side of the PSU
Version 3.0 & Earlier
- Various versions prior to release.