Firmer, lower, quick release bed mount, bigger prints / HE3D K280 / Delta / 20-2020 style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Firm bed mounting clips - a series of combined models to print for delta / 20-2020 style printers. Meant for HE3D.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This holds the heated bed in place. The heated bed should be ~100 to 110 degrees, max, which should be fine for PLA+. I wanted something as low as I could comfortably get (so now you can go from 600mm to about 625mm height). And something I could just “lift” the base up, as I find I need to keep fiddling with the boards and cables on this printer (the HE3D series isn't exactly easy to use).
Installation Notes
I made these just to bolt in using the existing bolts. I didn't want the glass / base to screw in, but I added a screw hole in case you want to.
I put the two “spacer” clips in first, then the white circular thing on top, and locked it into place.
You probably want to print (3) of the bases, and (6) of the (part-b) spacer clips.
Kit Items
This is part of a complete set I created for my K280 / HE3D and should be compatible with other 20-2020 style delta printers. It was designed around the 280mm base.
https://www.printables.com/@LloydSummers_3568672/collections/2637519
Version History
Version 4.0
- First Release
- Added additional screw holes
Version 3.0 & Earlier
- The 3.0 version doesn't have the second screw hole
- Various versions prior to release.