1 / 1
Flylens 75/85 850 mAH TPU Battery Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits GNB 2s 850mAh batteries, since the included ones that came with the quadcopter do not fit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
The flywoo 75/85 comes with the following battery holders for stick type batteries: 550mAh, 750mAh, 1000mAh. I happened to have a GNB 2s 850mAh batteries from Gaoneng. They would fit in the 1000 one, but they were super loose and messed up with the stabilization even with extra padding. Here's a design remix that fits a 850mAh battery perfectly.
Actual print dimensions of the holder: 17.615 mm x 15.5 mm
My battery dimensions according to manufacturer: 18 mm x 18 mm
Printing instructions:
- Must use TPU (the design relies on the squishiness, particularly for the connection to the quadcopter)
- Usual TPU instructions apply to avoid oozing (low speed, dry filament, try to avoid retractions, fast travel, possibly lower temperature)
- Make sure model is cleaned up
- Installing for the first might look violent, but the TPU is pretty resilient.
