FS90 servo motor wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How to assemble ? Requires 4 short M4 screws and nuts. To complete the wheel : Print the model 2 times, You may need a…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
How to assemble ?
Requires 4 short M4 screws and nuts.
To complete the wheel :
- Print the model 2 times,
- You may need a file tool (the thing you can remove plastic with, sorry I'm not sure about this translation) to make sure the servo horn fits perfectly (it needs to be tight for it to transfer torque),
- Press the two parts together and put the screws.
How to use ?
When correctly assembled, the wheel provides 4 pairs small holes to attach strings.
The bigger holes make it easier to turn the servomotor.
Why ?
This was created in the context the BA2 project at EPB (ULB). Note : To anyone with the intention of using this model for the same purpose, don't forget to comply with the CC license !
See also ...
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2 mm layer height / 0.4 mm nozzle
Infill:
60%
How I Designed This
Feel free to customize !
Fusion 360 files are provided along with STL. Feel free to modify it to better suit your needs. Don't forget to comply with CC license.
Category: Robotics