Flower vase for VW New Beetle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a personal touch to your VW New Beetle with this custom 3D-printed flower vase, designed to fit the iconic dashboard
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
🖨 Print Settings
Layer height: 0.2 mm (0.16 mm for finer details)
Perimeters (walls): 3 (≥1.2 mm)
Top/Bottom layers: 4–5
Infill: 20–30% (Grid or Gyroid)
Supports: Required
Brim/Raft: Optional – use Brim if you experience warping
🎨 Recommended Material
PLA: easiest to print, fine for indoor use if not exposed to strong sunlight
PETG: best balance for car use – strong, heat resistant, and easy to print
ASA/ABS: highly UV and heat resistant, but harder to print (warping, fumes)
👉 PETG is recommended for car interiors exposed to sunlight.
⚙ Additional Notes
Orientation: print upside down, with the opening facing the build plate (mouth down)
Cooling: on for PLA, low for PETG/ABS
Finishing: light sanding and clear coat can give a glossy finish
⚠ Safety Note
Recommended for artificial flowers only – safer while driving.
If you want to use natural flowers, insert a small inner tube/test tube for water.