Mole windmill clanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DO NOT PRINT. USE THE REMIX INSTEAD!
A clanger for a mole windmill to tap on the ground rod. The noise is supposed to deter moles. It's powered by the windmill. Used some common bolts and 3D printed parts. The main body will need supports and a brim. All parts printed in PETG for weather resistance and flexibility.
The torsion spring is not my design. It can be found here: https://www.printables.com/model/380701-torsion-spring
The mole windmill I used is this one: https://www.lehmans.com/product/mole-chasing-windmill/
Also needed: M4x6 (clanger), M4x20 (trip, replaces a screw holding the blades together) M3x12 (pivot) M3x8 (connects to spring, M3x12 should work too.) 2 self tapping screws
Category: Other