Smart Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A temperature controlled switch implemented in Micropython. Can be used for precise temperature control in areas like…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A temperature controlled switch implemented in Micropython.
Can be used for precise temperature control in areas like sous-vide.
This software was tested on Raspberry Pi Pico. Attached with:
DS18B20 temperature sensor I2C 128*64 mono-color display 3 LEDs for displaying status Rotary encoder to set target temperature Relay to control heating element (for example, a cheap rice-cooker that don't have any built-in microcontroller) More pictures: https://monokeith.top/?p=573
Source code: https://github.com/monoKeith/Temperature-Switch
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
Doesn't matter PETG
Notes:
PLA is not recommended, as temperature might get above 50 degrees.
Category: DIY