1 / 2
Kiba barrier inspired kunai prop R6 Siege — zdjęcie 1
1 / 2

Kiba barrier inspired kunai prop R6 Siege

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's my rundition of Kiba blade> I tried to stay as close to original as possible, without claims about screen accuracy.

Ocena
5 / 5
Polubienia
60
Pobrania
340
Wydruki
1
Wyświetlenia
2315
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made that prop to see if I can make accurate prop with very limited time and technical resources. 

If you print in resin, use:

blade right features and

blade left features

and then paint it in preferred colours. To make pattern pop i used gold colour dust. 

If you print FDM, use nofeature blade iles and after sanding watertransfer or sticker attach your pattern.

Hollow out canister before printing if you print resin to save material. 1mm thick walls are enough in most cases. 

In both cases I recommend printing handle reinforcer. Have fun and good luck!

Tagi