Anycubic Wash & Cure Max ethanol sump raise adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raises the sump of the ethanol container by 70mm so not to suck up so much debris when ethanol gets contaminated
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After cleaning the internal valve filters way too many times, I created a sump raise adapter for the ethanol container oAfter cleaning the internal valve filters way too many times, I created a sump raise adapter for the ethanol container. This makes it so the wash & cure station draws its ethanol / cleaning solution from higher up in the container, making so it does not suck up debris and contaminants afther the ethanol is no longer “extra fresh”.
Does not mean you do not have to clean up and replace your solution, means it is less likely to suck up heavier contamination in the solution.
!! Print with a filament that can withstand ethanol like PETG, PP or PA. If possible, add a rubber gasket on the bottom between the adapter and the container to prevent evaporation. There is a rubber gasket in the cap so no problems there
