1 / 1
Filament Side Guide with Y-Splitter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I merged two of suit's models into a single design and added two spacers for setups without an enclosure.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Because of my setup, I needed a suitable filament side guide. Since I didn’t want to constantly switch between the AMS and an external spool, I also needed a Y-splitter for both inputs. I had already printed the spoolroller and side spool arm from suit, and I really liked their models. So, I combined their y-splitter and filament guide into one design.
I added two spacers for P1P models without an enclosure.
Printing Tips
- Use supports
Extra Items
- 4x PC4-M10 PTFE-Tube Connectors
- a few cm's of PTFE-Tube
- 2 x Original PTFE-Tube Guide screws
- 1x M3x12
Assembly
- Use a wrench to gently tighten the PTFE connectors into the threaded holes
- Cut a few centimeters of PTFE-Tube and attach it between the two connectors on the top side (see Picture for reference)
- I recommend to use an M3 tap to prepare the hole on the side of the frame for the screw.
- Use the two original black PTFE guide screws along with an M3x12 screw to secure the guide to the frame
- I recommend testing both holes a few times with filament to make sure everything runs smoothly